sbr2060 document number: ds30957 rev. 9 - 2 1 of 5 www.diodes.com july 2012 ? diodes incorporated sbr2060ct sbr2060ctfp sbr is a re g istered trademark of diodes incor p orated. 20a sbr ? super barrier rectifier features ? low forward voltage drop ? excellent high temperature stability ? patented super barrier rectifier technology ? soft, fast switching capability ? lead-free finish; rohs compliant (notes 1 & 2) ? also available in green molding compound ? halogen and antimony free. ?green? device (note 3) ? mechanical data ? case: to-220ab, ito-220ab ? case material: molded plastic, ul flammability classification rating 94v-0 ? terminals: matte tin finish annealed over copper leadframe. solderable per mil-std-202, method 208 ? weight: to-220ab ? 1.85 grams (approximate) ito-220ab ? 1.65 grams (approximate) ordering information (notes 4 & 5) part number case packaging pb sbr2060ct to-220ab 50 pieces/tube ? green sbr2060ct-g to-220ab 50 pieces/tube pb sbr2060ctfp ito-220ab 50 pieces/tube ? green SBR2060CTFP-G ito-220ab 50 pieces/tube ? green sbr2060ctfp-jt-g ito-220ab (alternate) 50 pieces/tube notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (roh s 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com for more in formation about diodes incorpor ated?s definitions of halogen- and antimony-free, "gree n" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm br omine, <900ppm chlorine (<1500ppm t otal br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our webs ite at http://www.diodes.com/datasheets/ap02007.pdf. 5. for green molding compound version part numbers, add "-g" suffix to part number abov e. examples: sbr2060ct-g. marking information to-220ab top view ito-220ab top package pin out configuration to-220ab bottom view ito-220ab bottom view sbr2060ctfp = product type marking code a b = foundry and assembly code yyww = date code marking yy = last two digits of year (ex: 06 = 2006) ww = week (01-52) sbr2060ct = product type marking code a b = foundry and assembly code yyww = date code marking yy = last two digits of year (ex: 06 = 2006) ww = week (01-52) sbr2060ct yyww ab yywwab sbr2060ctfp
sbr2060 document number: ds30957 rev. 9 - 2 2 of 5 www.diodes.com july 2012 ? diodes incorporated sbr2060ct sbr2060ctfp sbr is a re g istered trademark of diodes incor p orated. maximum ratings (per leg) (@t a = +25c, unless otherwise specified.) single phase, half wave, 60hz, re sistive or inductive load. for capacitance load, derate current by 20%. characteristic symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v rm 60 v average rectified output current (per leg) (total) i o 10 20 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 150 a peak repetitive reverse surge current (2s-1khz) i rrm 2 a isolation voltage (ito-220ab only) from terminal to heatsink t = 3 sec. v ac 2000 v thermal characteristics (per leg) characteristic symbol value unit typical thermal resistance package = to-220ab package = ito-220ab r jc 2 4 c/w operating and storage temperature range t j , t stg -65 to +150 c electrical characteristics (per leg) (@t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition forward voltage drop v f - - 0.49 0.70 0.65 v i f = 10a, t j = +25c i f = 10a, t j = +125c leakage current (note 6) i r - - 0.5 100 ma v r = 60v, t j = +25c v r = 60v, t j = +125c notes: 6. short duration pulse test used to minimize self-heating effect.
sbr2060 document number: ds30957 rev. 9 - 2 3 of 5 www.diodes.com july 2012 ? diodes incorporated sbr2060ct sbr2060ctfp sbr is a re g istered trademark of diodes incor p orated. 0 5 10 0 25 50 75 100 125 150 t c , case temperature ( c) i f(ave) , average forward current (a) 0.1 1 10 100 0.00 0.10 0.20 0.30 0. 40 0.50 0.60 0.70 v f , inst antaneo us fo rward vo lt age (v) i f , instant aneous forward current (a) t a = 25 c t a = 125 c t a = 150 c t a = 75 c figure 1: current derating curve, per element figure 2: typical forward characteristics, per element 100000 0 102030405060 10000 1000 100 10 1 v , instantaneous reverse voltage (v) r i , instantaneous reverse current(ma) r t = 150c a t = 125c a t = 85c a t = 25c a figure 3: typical reverse characteristics, per elem ent figure 4: forward power dissipation
sbr2060 document number: ds30957 rev. 9 - 2 4 of 5 www.diodes.com july 2012 ? diodes incorporated sbr2060ct sbr2060ctfp sbr is a re g istered trademark of diodes incor p orated. package outline dimensions ito-220ab dim min typ max a 4.50 4.70 4.90 a1 3.04 3.24 3.44 a2 2.56 2.76 2.96 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 c 0.50 0.60 0.70 d 15.67 15.87 16.07 d1 8.99 9.19 9.39 e 2.54 e 9.91 10.11 10.31 l 9.45 9.75 10.05 l1 15.80 16.00 16.20 p 2.98 3.18 3.38 q 3.10 3.30 3.50 all dimensions in mm to-220ab dim min typ max a 3.56 - 4.82 a1 0.51 - 1.39 a2 2.04 - 2.92 b 0.39 0.81 1.01 b2 1.15 1.24 1.77 c 0.356 - 0.61 d 14.22 - 16.51 d1 8.39 - 9.01 e 2.54 e1 5.08 e 9.66 - 10.66 h1 5.85 - 6.85 l 12.70 - 14.73 l1 - - 6.35 p 3.54 - 4.08 q 2.54 - 3.42 all dimensions in mm ito-220ab (alternate) dim min max a 4.36 4.77 a1 2.54 3.10 a2 2.54 2.80 b 0.55 0.75 b1 1.20 1.50 c 0.38 0.68 d 14.50 15.50 d1 8.38 8.89 e 2.41 2.67 e 9.72 10.27 l 9.87 10.67 l1 15.8 17.00 p 3.08 3.39 q 2.60 3.00 all dimensions in mm 5 5 5 5 10 e q d d1 l1 3 x b1 3 x b 2 x e l ? p a a1 a2 c 123 a a1 c d e l b e1 b2 p h1 q l1 a2 e seating plane d1 16.00 0.20* *guaranteed by to-220ab leadframe design a a1 d1 a2 c e b b1 l l1 d q e ? p
sbr2060 document number: ds30957 rev. 9 - 2 5 of 5 www.diodes.com july 2012 ? diodes incorporated sbr2060ct sbr2060ctfp sbr is a re g istered trademark of diodes incor p orated. important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated a nd all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com
|
